Step-by-Step Guide
2013-2017 Acura ILX Backup Camera Replacement
OVERVIEW
This guide will show you how to do it yourself, saving you time and money. The backup camera is a common component that losses visibility or breaks over time on the Acura ILX.
DIFFICULTY
Video Guide
Supplies
Step 1: Remove the trunk liner
To remove the trunk liner, carefully unfasten the 11 clips that secure it in place. Please note that you will encounter 3 different types of clips during this process.
Step 2: Remove Camera Assembly
In step 2, disconnect the camera and trunk release button.
Step 3: camera disassembly
After removing the camera, disassemble it from the assembly. Start by unscrewing the 3 screws that secure the camera mount. Then, remove the 2 screws on the mount to detach the camera.
Step 4: reassembly
Reassemble the camera by reversing the disassembly process and ensuring that the camera plug is properly connected, with the notches facing each other.
Try factory mount first - switch to kit mount if the image is upside-down.
Step 5: Test
Now, check that your backup camera is working properly by shifting your car into reverse.
FAQ + Troubleshooting
How can I properly maintain my new backup camera to ensure it lasts longer?
To properly maintain your new backup camera, you can follow these tips:
- Clean the camera lens regularly with a microfiber cloth to remove any dirt or smudges.
- Keep the camera dry and protected from extreme temperatures.
- Avoid hitting or bumping the camera.
My backup camera isn't working after I replaced it, what could be the issue?
There could be a few potential issues causing the camera not to work:
- The camera may not be properly connected to the assembly or the wiring.
- The camera or mount may be defective or damaged.
- The camera fuse may have blown, check the car owner's manual on where the fuse box is located and how to check the fuses.
If you aren't able to solve the problem please reach out to us at hello@76deigns.com
The image on my backup camera is upside-down?
If you experience an upside-down image, ensure you are using the mount provided in the kit. If you are and the issue persists, you'll need to reinstall the factory camera mount.
Please reach out to us so we can investigate any potential manufacturing issues
How do I know if the kit will fit my 2013-2017 Acura ILX?
The kit is specifically designed to fit the 2013-2017 Acura ILX, so compatibility should not be an issue.
Are there any precautions I should take?
Always make sure to disconnect the battery before working on the camera, and be careful not to lose any small parts, like the o-ring on the harness, during the disassembly process.
How long does it take to replace the backup camera?
The process can take anywhere from 1-2 hours, depending on your level of experience and the availability of tools.
